Your browser doesn't support the HTML5 Canvas. Try using Firefox or Google Chrome.

Audio Technica ATW-2110A F-Band (Ch 70) Wireless Unipak System, Ch 70.

  • Product Code: AT2110AF

  • Description

Key features

Key features

  • ATW-R2100a receiver
  • ATW-T210a UniPak® body-pack transmitter
  • AT829cW cardioid condenser lavalier microphone
  • Automatic frequency scanning
  • Up to 10 user selectable channels available
  • Tone Lock™ squelch function fights interference


Overall System
Operating Frequencies UHF band
856.100 – 864.900 MHz (F Band) - Ch. 70)
606.500 – 629.900 MHz (U Band – ch.38)
721.500 – 746.375 MHz (G Band)
656.125 – 678.500 MHz (D Band)
487.125 – 506.500 MHz (I Band)
Number Of Channels 10 total
Frequency Stability ±0.005%, Phase Lock Loop frequency control
Modulation Mode FM
Frequency Response 100 Hz to 15,000 Hz
Operating Range 100 m (300') typical
Operating Temperature Range 41° F (5° C) to 113° F (45° C)
Receiving System True Diversity
Image Rejection 55 dB nominal, 50 dB minimum
Signal-To-Noise Ratio >100 dB at 40kHz deviation (A-weighted), maximum modulation 40 kHz
Sensitivity 20dBuV (S/N 60dB at 5 kHz deviation, IEC-weighted)
Total Harmonic Distortion < 1% (at 1 kHz, ±20 kHz deviation)
Audio Output Attenuator (ATTN) Unbalanced: 25mV (100k ohms load), 1/4" phone jack
Balanced: 50mV (Attenuator; 0dB)
12.5mV (Attenuator; -12dB) at 1 kHz ± 5kHz deviation, 100k ohm load, XLRM-type
Antenna Input BNC-type 50 Ohms – Bias voltage 12V DC, 60mA each
Dimensions 210 mm x 44 mm x 162.2 mm (W x H x D)
Weight 1.0kg
Accessories Included Two flexible UHF antennas, rack mount adapters, AC adapters
Belt Pack
RF Power Output High: 30mW; Low: 10mW, nominal
Spurious Emissions According to National Regulations
Battery Type 1.5V AA alkaline or rechargeable AA NiMH (not included)
Current Consumption 150 mA typical
Battery Life Approximately 9 hours (low), 7 hours (high)
Dimensions 66 mm x 92.3 mm x 22.5 mm (W x H x D)
Net Weight 80g

You currently have JavaScript disabled. This site requires JavaScript to be enabled. Some functions of the site may not be usable or the site may not look correct until you enable JavaScript. You can enable JavaScript by following this tutorial. Once JavaScript is enabled, this message will be removed.