Audio Technica Table Mic Stand
- Description
Key features
Overview
Audio Technica Table Mic and Stand
Audio Technica ES935s
This super-compact, small-diameter, 12.20”-long (C and H models are 7.52”) gooseneck delivers flexible positioning with a sleek, low-profile appearance. Its integral power module requires 11-52V DC phantom power. The mic’s low-profile element provides a narrow MicroLine® polar pattern with 90º acceptance angle. It is equipped with a recessed switch that permits low-end roll-off for reduction of low-frequency ambient background noise and a mute switch with an LED that lights when the mic is on.
Features
- Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
- Mute switch in base lights to indicate operational status of the microphone
- Low-profile element provides uniform MicroLine® polar pattern with narrow 90º acceptance angle
- Unobtrusive design with an overall length of only 12.20" (310.0 mm)
- Plugs into any standard XLRF-type connector, or direct mounts to 5/8"-27 stands using included thread-mount adapter
- Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
- Available interchangeable elements permit angle of acceptance from 90º to 360º
- Small diameter gooseneck permits highly flexible positioning while maintaining smooth, contoured appearance
Specifications
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | MicroLine® |
| FREQUENCY RESPONSE | 30-20,000 Hz |
| LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY | -35 dB (17.7 mV) re 1V at 1 Pa |
| IMPEDANCE | 250 ohms |
| MAXIMUM INPUT SOUND LEVEL | 133 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | 107 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 68 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 4 mA typical |
| SWITCH | Flat, roll-off;
Mute, on (with status LED) |
| WEIGHT | 3.2 oz (90 g) |
| DIMENSIONS | 12.20" (310.0 mm) long,
0.31" (8.0 mm) head diameter, 0.74" (18.9 mm) base diameter |
| OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
| OPTIONAL INTERCHANGEABLE ELEMENTS | ESE-C cardioid (120°)
ESE-H hypercardioid (100°) ESE-O omnidirectional (360°) |
| ACCESSORIES FURNISHED | AT8138 foam windscreen; AT8651 thread-mount adapter; AT8658 shock mount |
| AUDIO-TECHNICA CASE STYLE | M27 |
AT8615Aii
These Audio-technica anti-shock microphone stand effectively isolate mounted microphone from impact vibration and mechanical noise normally transmitted from the surface. They are intended for use with microphones stood on lecterns, pulpits, conference tables and similar surfaces.
Ideal for use with gooseneck microphones and other quick-mount type microphone using industrial standard XLRM 3-pin type connectors.
